made in the uk Stelrad Ideal Commercial
Logic code combi boiler

The Logic Code Combi Boiler

Code Combi

Designed to take the headache out of meeting Building Regulations, the Logic Code Combi from Ideal is a simple one-box solution, capable of supporting up to level 4 of the Code for Sustainable homes.

Available in a choice of DHW outputs, 26 - 38 kW, the Logic Code Combi provides a perfect solution for both new build and retro fit solutions where energy efficiency is a key concern.

The Logic Code Combi comes complete with a 2 year parts and labour warranty * and a NOx class 5 rating for the ultimate in peace of mind.

When used with controls and weather compensation, the Logic Code Combi provides the perfect no-nonsense solution for a range of domestic properties.

Logic code combi
Made in the UK2 year warranty Compact cupboard fit Frost protection Flue variants NOx class 5
Our boilers are manufactured at the Ideal factory in Hull, East Yorkshire. Ideal has been manufacturing here for over 100 years.
Free 2 year warranty for peace of mind. To be eligible you must register your boiler within 30 days of purchase and have it serviced regularly.
This boiler is designed to fit into a standard kitchen cupboard.
Frost protection, so your boiler will run in harsh weather.
A range of flue options to suit your home.
Low NOx levels means low emissions.

Spec Sheet & User Guide

Logic Code Combi Boiler Spec Sheet Logic Code Combi Users Guide

Features & Benefits at a glance

  • Wide range of outputs to suit all homes, including 26kW, 33kW & 38 kW
  • Compact and stylish 'cupboard fit' design with concealed connections
  • 2 year parts and labour warranty *
  • High efficiency – reduced running costs
  • Choice of optional timers and room thermostats
  • Frost protection to guard against freezing outdoor temperatures
Technical Specification: Logic Code Combi
  • Size & Performance
  • Construction & Installation
  • Clearances & User Interface
  • Pipes & Flues
263338
Casing dimensions (h w d) mm 
Height830
Width395
Depth278
Weight (packed kg)41.341.441.6
Maximum Installation Weight (kg)35.93636.2
  
CH output (kW) Min/Max @ 70C4.8 - 24.2
CH output (kW) Min/Max @ 40C5.1 - 25.6
DHW output (kW) Max26.132.738.2
DHW flow rate l/min. 35°C rise10.713.415.7
SEDBUK91%91.1%91%
SEDBUK (2009)89%89%89%
NOx ClassificationCLASS 5
Adjustable to LPGNo
 263338
Heat exchanger material Cast Aluminium - Silicon Alloy
Burner typeDownward firing pre-mix
Fully modulatingYes
DHW plate heat exchangerYes
Integrated hydroblockYes
  
Suitable for sealed systemsYes
Suitable for open-vent systemsNo
Filling loopYes
Pre-wired mains leadYes
Flow regulatorYes
Inbuilt system bypassYes
Inbuilt condensate trap/siphonYes
Pump exerciseYes
Inbuilt boiler frost protectionYes
Zero compartment ventilationYes
Copper tail connectionsYes
 263338
Top (mm) (from top of boiler)165
Side (mm)2.5
Bottom (mm)100
Front (mm)450*
  
User displayDigital (Alpha/numeric)
User interfaceDigital display & manual controls
DiagnosticsFault diagnostic display
User adjustableManual heating control
'Eco' setting on CHYes
Inbuilt ProgrammerOptional

* Can be reduced to 5mm for cupboard fit, 450mm required for servicing.

 263338
Pre-piping kitYes
Stand-off kit inc. pipesYes
Security bracket kitYes
PRV Wall Outlet KitYes
Terminal wall plate kitNo
Weather compensation kitYes
  
Max horizontal flue9m8m6m
Max vertical flue7.5m
Powered Vertical flue22m
High level flue outlet kitYes
Direct rear flue kit (55/80)No
  
Gas connection15mm
CH flow & return22mm
DHW inlet & outlet15mm
Pressure relief valve15mm
Condensate drain21.5mm

* Click here to see the Warranty Terms & Conditions